HES Smart Pac III


Here we have a HES 1006 CS in 12-hour continuous passage with more cycles. The strike was getting hot while receiving continuous power reaching temperatures in excess of 121 degrees Fahrenheit (see figure 1).
  

After purchasing and installing the HES smart pac (See figure 2) the temperature was reduced to a more reasonable temperature and has maintained function well. We recommend installing a smart pac with all heavily used access control systems, especially ones that are receiving continuous power for extended periods of time like this one being put in passage mode for hours on end. (See figure 3)

The author of this post may benefit from a commission from the use of this link.
See the link below to purchase here:

Specs from the manufacturer:

For dependable installations, add the SMART Pac III

The 2005M3 SMART Pac III is an in-line power controller that is able to receive input voltages from 12 to 32V AC or DC. It has a built-in bridge rectifier. The continuous duty timer reduces the initial voltage by 25% to extend the life of the electric strike. Includes built-in resettable fuse, MOV, voltage regulation, and input status LED.

Standard Features

  • Accepts a wide range of input voltage: 12-32 Volts AC* or DC
  • Output 12VDC or 24VDC, depending on input voltage
  • Smart LED Input Status Indicator
  • Built-in bridge rectifier
  • Built-in surge protection / voltage regulation
  • Supports fail-secure or fail-safe configured electric strikes
  • Continuous duty: reduces initial voltage by 25% after a fixed period of time, to provide cooler more efficient operation of the strike
  • Self-resetting overcurrent protection
  • Configures strike eliminating the need for voltage specific pigtails
  • Extends the warranty of HES electric strikes

Installing a SMART Pac III power controller with any new products extends the 1-year warranty on electrical components, including the SMART Pac III, to the full 3-5 warranty term applicable to each Series mechanical component as outlined in standard terms and conditions.

*Note:  For use with a 1006 electric strike, the input voltage must be a filtered DC with a ripple of less than 1 volt RMS.
**Note: The SMART Pac III can not provide an output voltage greater than the input voltage.

Here we have a He’s 1006 CS in 12 hour continuous passage more cycles. The strike was getting hot while receiving continuous power reaching temperatures in excess of 121 degrees Fahrenheit (see figure 1).

After purchasing and installing the HES smart pac (see photo 2) the temperature was reduced to a more reasonable temperature and has maintained function well.We recommend installing a smart pac with all heavily used access control systems, especially ones that are receiving continuous power for extended periods of time like this one being put in passage mode for hours on end. (See figure 3)

See link below to purchase here:
(affiliate link here)
Specs from manufacturer:

For dependable installations, add the SMART Pac III

The 2005M3 SMART Pac III is an in-line power controller that is able to receive input voltages from 12 to 32V AC or DC. It has a built-in bridge rectifier. The continuous duty timer reduces initial voltage by 25% to extend the life of the electric strike. Includes built-in resettable fuse, MOV, voltage regulation and input status LED.

Standard Features

  • Accepts wide range of input voltage: 12-32 Volts AC* or DC
  • Output 12VDC or 24VDC, depending on input voltage
  • Smart LED Input Status Indicator
  • Built-in bridge rectifier
  • Built-in surge protection / voltage regulation
  • Supports fail secure or fail safe configured electric strikes
  • Continuous duty: reduces initial voltage by 25% after a fixed period of time, to provide cooler more efficient operation of the strike
  • Self-resetting over-current protection
  • Configures strike eliminating need for voltage specific pigtails
  • Extends the warranty of HES electric strikes

Installing a SMART Pac III power controller with any new products extends the 1 year warranty on electrical components, including the SMART Pac III, to the full 3-5 warranty term applicable to each Series mechanical component as outlined in standard terms and conditions.

*Note:  For use with a 1006 electric strike, the input voltage must be a filtered DC with a ripple of less than 1 volt RMS.
**Note: The SMART Pac III can not provide an output voltage greater than the input voltage.